1: Connect the outlet of AIR PUMP to the "IN" on OZONIZE, and connect the AIR STONE to the "OUT", and put it into the water.

2: Adjust the "OZ-150" to the density which is needed, and then adjust the  "TIMER" to set up the time which is needed.

A-15   20x16x6.5cm(7.9x6.3x2.6inch) 

3: Plug in and press the "POWER" to "1" and the light of power is on, and then press "START" so the red light is on,and the OZONIZE will start to operate.

4: When the red light of "START" is lambent, it means that the time you set is up and the OZONIZE won't operate. So if you need to use it again, turn off the power first and turn on it again then press "START".

5: If you want to use OZONIZE continually, please turn the "TIMER" to the "CONTD" (THE FIRST GRID). If you don't want to use it anymore, you can press "POWER" to "0", and the light of power will damp, and the OZONIZE will stop.

6: If you don't want to use it anymore, just press down.